| PART |
Description |
Maker |
| 804-001 |
Push-Pull Mighty Mouse
|
Glenair, Inc.
|
| 852-056 |
Mighty Mouse Connectors
|
Glenair, Inc.
|
| 811-007-15 |
Mighty Mouse High Density
|
Glenair, Inc.
|
| 805-001 |
Mighty Mouse Size #8 Connector Plug
|
Glenair, Inc.
|
| 800-006 |
Mighty Mouse UN Mating Thread Plug
|
Glenair, Inc.
|
| 801-036-16M7-10PA |
Series 801 Mighty Mouse High-Speed Double-Start ACME Threads
|
Glenair, Inc.
|
| 801-037-01 |
Series 801 Mighty Mouse High-Speed Double-Start ACME Threads
|
Glenair, Inc.
|
| DS3687H DS3687J-8/A DS3687N-8/B DS3687H/A DS3687N- |
Dual Peripheral Driver
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.6V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.3V, Timeout: 20ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.0V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin 双外围驱动器
|
KEMET Corporation
|
| 809-191 |
Series 811 Mighty Mouse High Density (HD) Rubber Protective Covers 809-190 and 809-191
|
Glenair, Inc.
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| MAX6713Z MAX6713T MAX6713S MAX6713R MAX6713M MAX67 |
Microprocessor reset circuit with manual reset input. Reset threshold 2.63V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 4.38V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 4.63V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low open-drain reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-high push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low push-pull reset.
4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4
8-Bit Shift Register 16-SOIC -40 to 125 4引脚、SC70微处理器复位电路，带有手动复位输
8-Bit Shift Register 16-PDIP -40 to 125 4引脚、SC70微处理器复位电路，带有手动复位输
|
Maxim Integrated Produc...
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maixm
Maxim Integrated Products, Inc.
|
| MC-7856 |
CATV 22 dB PUSH-PULL AMPLIFIER
|
CEL[California Eastern Labs]
|
|
