| PART |
Description |
Maker |
| 809-198 |
Push-Pull Mighty Mouse
|
Glenair, Inc.
|
| 125-0304-0 125-0311-5 125-0309-3 125-0302-4 125-03 |
KUPPLUNG PUSH PULL UEBERWURFKAPPE 16POL
EINBAUBUCHSE PUSH PULL 16POL
KUPPLUNG PUSH PULL UEBERWURFKAPPE 12POL
EINBAUBUCHSE PUSH PULL 12POL
EINBAUSTECKER PUSH PULL 20POL
EINBAUSTECKER PUSH PULL 12POL
STECKER PUSH PULL UEBERWURFKAPPE 12POL
STECKER PUSH PULL UEBERWURFKAPPE 20POL
KUPPLUNG PUSH PULL UEBERWURFKAPPE 20POL
STECKER PUSH PULL UEBERWURFKAPPE 16POL
EINBAUSTECKER PUSH PULL 16POL
STECKER AUSSENGEWINDE 16POL
EINBAUSTECKER PUSH PULL 8POL
KUPPLUNG AUSSENGEWINDE 16POL
STECKER AUSSENGEWINDE 20POL
EINBAUBUCHSE PUSH PULL 20POL EINBAUBUCHSE推拉20POL
STECKER AUSSENGEWINDE 6POL STECKER AUSSENGEWINDE 6POL
EINBAUSTECKER PUSH PULL 6POL EINBAUSTECKER推拉6POL
EINBAUSTECKER AUSSENGEWINDE 4POL
|
Molex, Inc.
|
| 809-108 |
Series 800 Mighty Mouse
|
Glenair, Inc.
|
| 811-005-07-15 |
Mighty Mouse High Density
|
Glenair, Inc.
|
| 811-003-01 |
Series 811 Mighty Mouse High Density (HD) Pre-Wired In-Line Receptacle Connectors 811-003-01
|
Glenair, Inc.
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| 811-005-07 |
Series 811 Mighty Mouse High Density (HD) Jam Nut P CB Receptacle Connectors 811-005-07 and 811-006-07 With S traight P C Tails
|
Glenair, Inc.
|
| 811-005-02 |
Series 811 Mighty Mouse High Density (HD) Square Flange PCB Receptacle Connectors 811-005-02 and 811-006-02 With Straight PC Tails
|
Glenair, Inc.
|
| FP203 |
Push-Pull Circuits
|
Sanyo Semicon Device
|
| ADM1815-10AKS-REEL ADM1815-10AKS-RL7 ADM1815-10ART |
Microprocessor Supervisory in SOT-23 with Active Low Push-Pull Output Choices
Microprocessor Supervisory in SOT-23 with Active High and Low Push-Pull Output, Positive Reset Output
Microprocessor Supervisory in SOT-23 with Low Active OpenDrain Output Choices
Microprocessor Supervisory in SOT-23 with Active Low Open Drain Output Choices
Microprocessor Supervisory in SOT-23 with Active High Push-Pull Output
Microprocessor Supervisory in SOT-23 with Open Drain Output Choices
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
|
ANALOG DEVICES INC
|
| S8740340PT |
GaAs Push Pull Hybrid
|
PDI
|
|
