| PART |
Description |
Maker |
| ADP1190 |
Integrated 500<font style="text-transform: lowercase">mA Load Switch with Quad Signal Switch
|
Analog Devices
|
| ADP199 |
500 mA Logic Controlled High-Side Load Switch
|
Analog Devices
|
| FDC6331L07 FDC6331L |
Integrated Load Switch
|
http://
FAIRCHILD[Fairchild Semiconductor]
|
| FDG6324L |
Integrated Load Switch
|
Fairchild Semiconductor
|
| FDC6323 FDC6323L |
Integrated Load Switch
|
Fairchild Semiconductor Corporation
http://
|
| NCP45520 |
NCP45520 & NCP45521 Datasheet - ecoSWITCH Advanced Load Management: 11.5A Integrated Load Switch w/ Ultra-Low R<sub>ON</sub>, V<sub>IN</sub> Range= 0.5V-13.5V, Power Good Out or Adj. Slew Rate, Adj. Discharge, & Fault Protection
|
ON Semiconductor
|
| NCP4545 |
NCP4545 Datasheet - ecoSWITCH™ Advanced Load Management: 10.5A Integrated Load Switch w/ Ultra-Low R<sub>ON</sub>, V<sub>IN</sub> Range= 0.5V-6V, Adj. Slew Rate, Adj. Discharge, Adj. Turn-On Delay
|
ON Semiconductor
|
| MAX4837 MAX4836 MAX4836-MAX4837 MAX4837EUT MAX4837 |
3.3 V, reset timeout: 1800 ms, 500 mA LDO linear regulator with current-limiting switch
3.3 V, reset timeout: 225 ms, 500 mA LDO linear regulator with current-limiting switch
3.3 V, reset timeout: 30 ms, 500 mA LDO linear regulator with current-limiting switch
3.3 V, reset timeout: 3.75 ms, 500 mA LDO linear regulator with current-limiting switch
3.3 V, 500 mA LDO linear regulator with current-limiting switch
500mA LDO Linear Regulators with Current-Limiting Switch
From old datasheet system
|
MAXIM - Dallas Semiconductor
Maxim Integrated Products
|
| AQV210EAX AQV210EHAX AQV214EAX |
PhotoMOS relay, GU (general use) E-type, 1-channel (form A ) type. I/O isolation: standard 1,500 VAC. Output rating: load voltage 350V, load current 130 mA. Tape and reel packing style, picked from the 1/2/3-pin side.
PhotoMOS relay, GU (general use) E-type, 1-channel (form A ) type. I/O isolation: reinforced 5,000 VAC. Output rating: load voltage 350V, load current 130 mA. Tape and reel packing style, picked from the 1/2/3-pin side.
PhotoMOS relay, GU (general use) E-type, 1-channel (form A ) type. I/O isolation: standard 1,500 VAC. Output rating: load voltage 400V, load current 120 mA. Tape and reel packing style, picked from the 1/2/3-pin side.
|
Matsushita Electric Works(Nais)
|
| WD101 WD105 WD200 WD102 WD506 WD100 WD103 WD104 WD |
DC/DC Converters
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage -12.0 VDC. Output current -625 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 12.0 VDC. Output current 1250 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 12.0 VDC. Output current 1250 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage 5.0 VDC. Output current 3000 mA. Input current 20 mA(no load), 800 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 3.3 VDC. Output current 3000 mA. Input current 20 mA(no load), 543 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage -15.0 VDC. Output current -500 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage 15.0 VDC. Output current 1000 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage -15.0 VDC. Output current -500 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage -15.0 VDC. Output current -500 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 15.0 VDC. Output current 1000 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage -12.0 VDC. Output current -625 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 3.3 VDC. Output current 3000 mA. Input current 20 mA(no load), 543 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 5.0 VDC. Output current 3000 mA. Input current 20 mA(no load), 800 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 5.0 VDC. Output current 3000 mA. Input current 20 mA(no load), 800 mA(full load).
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage 12.0 VDC. Output current 1250 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 15.0 VDC. Output current 1000 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage -12.0 VDC. Output current -625 mA. Input current 30 mA(no load), 780 mA(full load).
|
List of Unclassifed Man...
International Power Sources
ETC[ETC]
List of Unclassifed Manufacturers
|
| NUD310506 NUD3105LT1G NUD3105 NUD3105LT1 |
Integrated Relay, Inductive Load Driver
|
ONSEMI[ON Semiconductor]
|
|
