| PART |
Description |
Maker |
| 621065-000 D-142-65-ND |
SOLDERSLEEVE* SHIELD TERMINATOR
|
PANDUIT CORP.
|
| C8107 |
3 /C 18 AWG Stranded Tinned Copper, FEP Insulation, Overall Aluminum/Polyester Shield, TC Braid Shield, and FEP Jacket
|
General Cable Technologies Corporation
|
| 750648-000 371176-000 D-1744-03 D-1744-04 D-1744-0 |
SOLDERSLEEVE WIRE SPLICE
|
PANDUIT CORP.
|
| 624037-000 D-101-35 D-101-33 D-101-34 D-101-36 |
SOLDERSLEEVE* DEVICE WITH PRE-INSTALLED LEAD
|
PANDUIT CORP.
|
| A104742 D-181-1220-90/9 D-181-1224-90/9 D-181-1222 |
COAXIAL SOLDERSLEEVE DEVICE WITH PRE-INSTALLED LEAD
|
PANDUIT CORP.
|
| CWT-9005 CWT-9001 |
SOLDERSLEEVE ONE-STEP WIRE TERMINATOR, LOW TEMPERATURE
|
Tyco Electronics
|
| B-151-05 B-151-07 B-151-13 B-151-11 |
SOLDERSLEEVE LOW-FIRE-HAZARD WITH PRE-INSTALLED LEAD.
|
Tyco Electronics
|
| B-008-13 B-008-14 B-008-11 B-008-15 011829-000 |
SOLDERSLEEVE* WIRE TO WIRE SPLICE, LOW TEMPERATURE
|
Tyco Electronics
|
| 74697-2609 0746972609 |
2.00mm (.079) Pitch 5-Row VHDM-HSD?/a> Backplane Header, Guide Pin Signal Module, Shield Pin End Version, Advanced Mate Shield, 100 Circuits
2.00mm (.079) Pitch 5-Row VHDM-HSD Backplane Header, Guide Pin Signal Module, Shield Pin End Version, Advanced Mate Shield, 100 Circuits
|
http://
Molex Electronics Ltd.
|
| GRF2.0215.11 GRF2.0212.11 |
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 15A; Terminal Type: Quick Connect Solder Tabs; "Lock and shield" snap-in design; Appliance inlet; ECM-shield 10/15A, 125/250VAC, MALE, MAINS POWER CONNECTOR, SOLDER, SOCKET
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 15A; Terminal Type: Quick Connect Solder Tabs; "Lock and shield" snap-in design; Appliance inlet; line filter; ECM-shield
|
SCHURTER AG
SCHURTER INC
|
| MDIN03SS MDIN04SS MDIN05SS MDIN06SS MDIN08SS |
90° PTH Socket (with Shield)
90隆? PTH Socket (with Shield)
|
Yamaichi Electronics Co., Ltd.
|
