| PART |
Description |
Maker |
| BL-C34-2G-41E |
Designed for ease in circuit board assembly
|
BRIGHT LED ELECTRONICS CORP
|
| STEVAL-MKI075V1 |
LY3100ALH adapter board designed for a standard DIL24 socket
|
ST Microelectronics
STMicroelectronics
|
| STEVAL-MKI009V1 |
LIS3LV02DL adapter board designed to be plugged into a standard DIL 20 socket
|
STMicroelectronics
|
| IRDC3637 |
Controller IC designed to provide a low cost synchronous Buck regulator for on-board DC to DCapplications in a small 8-pin SOIC.
|
International Rectifier
|
| AM29824DM AM29826DM AM29822DM AM29822LMB AM29822DM |
9-Bit D-Type Flip-Flop
Reference Design kit for the iP1206 a 300kHz, 30A Synchronous Buck Converter; A IRDCIP1206-B with Standard Packaging
Intelligent Power Module. Gate Driver IC integrated with a half bridge FredFET Designed for sub 250W Motor Drive applications in a 9-Lead SIP. RDSon of 1.0 Ohm; A IR3101 with Standard Packaging 10位D型触发器
IR1150 Demo Board designed for use in continuous conduction mode boost converter applications for power factor correction and harmonic current reduction.; A IRAC1150-300W with Standard Packaging 10位D型触发器
Octal D-Type Flip-Flop 八路D类触发器
|
Toshiba, Corp.
Electronic Theatre Controls, Inc.
ITT, Corp.
ATM Electronic, Corp.
|
| IR1150 IR1150PBF IR1150ISTRPBF |
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Consumer market
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Industrial market.
|
International Rectifier
|
| MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
| KIC9321F-005 |
CMOS LSI Designed For FM/MW/LW Radio of PLL Frequency Synthesizer System(用于锁相环频率合成系统FM/MW/LW波段调谐的CMOS大规模集成电
CMOS LSI Designed For FM/MW/LW Radio of PLL Frequency Synthesizer System(用于锁相环频率合成系FM/MW/LW波段调谐的CMOS大规模集成电 的CMOS大规模集成电路设计调中波/龙运的锁相环频率合成系统的无线电（用于锁相环频率合成系统调频/中波/龙运波段调谐的的CMOS大规模集成电路）
|
KEC Holdings
|
| GSM31P256KB-I66 GSM31P512KB-I66 |
x64 Interleaved Burst Mode SRAM Module
256KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统56KB二级高速缓冲存储器)
512KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统12KB二级高速缓冲存储器)
|
GSI Technology
|
| P0080SAMCLRP P0300SAMCLRP P2100SCMCLRP P0300SCMCLR |
MC Series DO-214 are low capacitance SIDACtor庐 devices designed to protect
MC Series DO-214 are low capacitance SIDACtor? devices designed to protect
|
Littelfuse
|
