| PART |
Description |
Maker |
| 2SC5585 |
Hig current. Low VCE(sat):VCE(sat) 250mV at IC=200mA/IB=10mA
|
TY Semiconductor Co., Ltd
|
| AN1406 AN1406_D |
DESIGNING WITH PECL (ECL AT 5.0)
|
ON Semiconductor
|
| AN2001 |
Designing Expansion Boards
|
Motorola, Inc.
|
| AN10897 |
A guide to designing for ESD and EMC
|
NXP Semiconductors
|
| AN3978 |
Designing a digital output module
|
STMicroelectronics
|
| AN1330 |
DESIGNING WITH L5970D, 1A HIGH EFFICIENCY DC/DC CONVERTER
|
SGS Thomson Microelectronics
|
| AN1185 |
DESIGNING FOR COMPATIBILITY BETWEEN ST AND AMD FLASH MEMORIES
|
SGS Thomson Microelectronics
|
| AN2782 |
Solution for designing a 400 W fixed-off-time controlled
|
STMicroelectronics
|
| AND8053_D AND8053.REV0 |
Designing CrystalOscillators with ModernCMOS Gates
From old datasheet system
|
ON Semiconductor
|
| SAWX4A0X |
Designing with Acriche A4 Connect using a siple diode bridge directly to AC power
|
Seoul Semiconductor
|
| D1B121000 |
Dip type construction with the same terminal pitch as ICs or TTLs simplifies PC board designing.
|
COSMO[COSMO Electronics Corporation]
|
