| PART |
Description |
Maker |
| BP5842A |
LED DISPLAY DRIVER, SMA7
High-power LED Drivers for Ιllumination
|
Rohm
|
| BP5842A |
High-power LED Drivers
|
Rohm
|
| ILD-4035-E6327 ILD4035 |
LED Drivers for High Power LEDs
|
Infineon Technologies AG
Infineon Technologies A...
|
| BP5841A1 |
High-power LED Drivers for Ιllumination
|
Rohm
|
| BP5841A |
High-power LED Drivers for Ιllumination
|
Rohm
|
| MAX16833 MAX16833B MAX16833D |
High-Voltage HB LED Drivers with Integrated High-Side Current Sense
|
Maxim Integrated Products, Inc.
|
| MAX1682408 MAX16824AUE MAX16825AUE |
High-Voltage, Three-Channel Linear High-Brightness LED Drivers
|
Maxim Integrated Products
|
| TC4422VSM.SM713 TC4421 TC4421_04 TC4421CAT TC4421C |
The TC4421/4422 are high current buffer/drivers capable of driving large MOSFETs and IGBTs. They are essentially immune to any form ...
9A High-Speed MOSFET Drivers
|
MICROCHIP[Microchip Technology]
|
| MAX7221 MAX7221CNG MAX7221CWG MAX7221ENG MAX7221ER |
SOLDER SHELLS, DB37 FEMALE
Serially Interfaced / 8-Digit LED Display Drivers
IC,LED DISPLAY DRIVER,7-SEG,COMMON-CATHODE,DIP,24PIN,PLASTIC
Serially Interfaced, 8-Digit LED Display Drivers
|
MAXIM - Dallas Semiconductor
Maxim Integrated Products, Inc.
Maixm
MAXIM[Maxim Integrated Products]
http://
|
| TC1412 TC1412N TC1412NEUA713 TC1412EUA713 TC1412EP |
2A High-Speed MOSFET Drivers
The TC1412/1412N are 2A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. ...
The TC1412/1412N are 2A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. The
|
http://
Microchip
|
| TC1413 TC1413N TC1413NCOA TC1413NCOA713 TC1413NEUA |
3A High-Speed MOSFET Drivers
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. ...
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity that occurs on the ground pin
|
http://
Microchip
|
