| PART |
Description |
Maker |
| BA5815FM |
Optical Disc LSIs > Motor/Actuator driver > CD/CD-ROM driver(5ch,6ch)
|
ROHM
|
| BD8255MUV-M |
6ch System Motor Driver For Car AV
|
Rohm Co., Ltd.
|
| TD62706P-H TD62706FA-H |
6CH HIGH .VOLTAGE SOURCE .CURRENT DRIVER
|
TOSHIBA
|
| MAX792 MAX792CPE MAX792CSE MAX792EJE MAX792EPE MAX |
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.62V. Reset and low-line threshold accuracy -2%
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.37V. Reset and low-line threshold accuracy -2%
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.61V. Reset and low-line threshold accuracy -2%
Microprocessor Voltage Monitors with Programmable Voltage Detection
Dual D-type Positive-Edge-Triggered Flip-Flops With Clear And Preset 14-CFP -55 to 125 微处理器和非挥发性内存监控电
Microprocessor and Non-Volatile Memory Supervisory Circuits
From old datasheet system
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 3.06V. Reset and low-line threshold accuracy -2%
|
MAXIM - Dallas Semiconductor
Maxim Integrated Products, Inc.
MAXIM[Maxim Integrated Products]
|
| TD62703 TD62703F TD62703P E005680 |
6CH HIGH VOLTAGE SOURCE DRIVER
From old datasheet system
|
Toshiba Corporation
TOSHIBA[Toshiba Semiconductor]
|
| TD62306 TD62306F TD62306P E005646 |
From old datasheet system
6CH LOW SATURATION SINK DRIVER
|
TOSHIBA[Toshiba Semiconductor]
|
| TD62706FA-H TD62706P-H E008402 TD62706 TD62706A-H |
6ch HIGH-VOLTAGE SOURCE-CURRENT DRIVER
From old datasheet system
|
Toshiba Semiconductor
Toshiba Corporation
|
| R2J20651NPG3 R2J20651NP R2J20651NP-G3 |
35 A HALF BRDG BASED MOSFET DRIVER, PQCC40 6 X 6 MM, 0.95 MM HEIGHT, 0.50 MM PITCH, LEAD FREE AND HALOGEN FREE, QFN-40
Integrated Driver - MOS FET (DrMOS)
|
Renesas Electronics Corporation
|
| BD7905BFS |
6CH Power Driver for CD-ROM, DVD-ROM
|
Rohm CO.,LTD.
|
| TC53 TC53N3002ETR TC53C1802CTTR TC53C1802ETR TC53C |
The TC53 is a low power voltage detector. Typical supply current consumption is only 1A at an input voltage of 2V. The voltage detection threshold setting is factory-programmed and guaranteed to ±2% accuracy. Threshold settings are a
|
MICROCHIP[Microchip Technology]
|
| MAX795 MAX795CPA MAX795CSA MAX795EPA MAX795ESA MAX |
Microprocessor supervisory circuit. Reset threshold 3.00V to 3.15V. Active-low reset. Backup-battery switchover. External switch driver. Chip-enable gating.
3.0V/3.3V Adjustable Microprocessor Supervisory Circuits
Microprocessor supervisory circuit. Reset threshold 2.55V to 2.70V. Active-low reset. Backup-battery switchover. External switch driver. Chip-enable gating.
|
MAXIM - Dallas Semiconductor
Maixm
MAXIM[Maxim Integrated Products]
|
