| PART |
Description |
Maker |
| LTC3723-1 |
Synchronous Push-Pull PWM Controllers
|
linear
|
| LTC3723-2 |
Synchronous Push-Pull PWM Controllers
|
Linear Technology
|
| RP5-19J-14SC02 RP5-19R-14SC01 RP5-19RB-14SR01 RP5- |
KUPPLUNG VIDEO PUSH PULL 14POL
BUCHSE FLANSCH VIDEO PUSH PULL 14POL
BUCHSE VIDEO PCB PUSH PULL 14POL
STECKER VIDEO PUSH PULL 14POL STECKER视频推拉14POL
|
HIROSE ELECTRIC Co., Ltd.
|
| DS3687H DS3687J-8/A DS3687N-8/B DS3687H/A DS3687N- |
Dual Peripheral Driver
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.6V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.3V, Timeout: 20ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.0V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin 双外围驱动器
|
KEMET Corporation
|
| L293C 1329 |
PUSH-PULL FOUR CHANNEL/DUAL H-BRIDGE DRIVER
PUSH-BRIDGE DRIVER PUSH-PULL FOUR CHANNEL/DUAL
From old datasheet system
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| FP203 |
Push-Pull Circuits
|
Sanyo Semicon Device
|
| DRF130111 |
MOSFET Push-Pull Hybrid
|
Microsemi Corporation
|
| AAT4298IJQ-T1 AAT4296 AAT4296IJS-T1 AAT4298 AAT429 |
Five/Six Channel Push/Pull I/O Expander
|
Advanced Analogic Technologies
Advanced Analog Technology, Inc.
|
| S8740220GT |
GaAs Push Pull Hybrid
|
PDI
|
| MAAM-011177-TR1000 MAAM-011177-TR2500 MAAM-011177- |
Push-Pull CATV Amplifier
|
M/A-COM Technology Solu...
|
|
