| GB12864CSGBBMUB-V01 GB12864CSGBBMUA-V01 GB12864CSG |
MOTOR,DC,3-9V,6800RPM,0.25A, 6.9G-CM,0.5W,SHFT 02X9.6mm
MOTOR,DC,6-12V,6410RPM,0.15A, 8.5G-CM,0.6W,SHFT 02X9.6mm
MOTOR,DC,6-24V,5130RPM,0.2A, 14.3G-CM,0.8W,SHFT 02X9.6mm
PROTOTYPE BUILDER,4.6"X4.3" PCB,PRE ETCHED,DRILLED
SWITCH,PB,PA102A1-B/BL, SPDT,6A,ON-ON,BLACK
PLUG,DC,PWR,R/A,F,2.1x5.5x12MM 2.8x11.0MM STRAIN RELIEF,BLAC
LED,GREEN,565NM,T-1, 350MCD,1.7V,V/A40,(10)
INDUCTOR,SMD(0805),12 NH, 600 IDC,0.15 OHMS
PROTOTYPE BUILDER,5.5"X8.0" PCB,PRE-ETCHED,DRILLED
INDUCTOR,TOROID,HORIZONTAL, 22.0 uH,7.0 IDC,0.015 OHM,
INDUCTOR,SMD(0805),27 NH, 500IDC,0.25 OHMS
INDUCTOR,SMD(0805),2.2 NH, 600 IDC,0.08 OHMS
INDUCTOR,SMD(0805),33 NH, 500 IDC,0.27 OHMS
INDUCTOR,SMD(0805),39 NH, 500 IDC,0.29 OHMS
INDUCTOR,SMD(0805),3.3 NH, 600 IDC ,0.08 OHMS
SWITCH,TOG,MINI,(ON)-OFF-(ON) DPDT,SOLDER,125V/6A,1/4"MTNG
SWITCH,TOG,MINI,SPDT,ON-ON, SOLDER,125V/6A,1/4"MTNG,FLAT
SWITCH,TOG,SPDT,ON-ON(M148PC) RA PCB,6A/125VAC,1/4"MTNG.
SWITCH,PB,PA101A1-R/BL, SPST,6A,ON-OFF,RED
AP,MONO,4700PF,100V,10%,X7R -10
AP,MONO,470PF,100V,10%,X7R INCREMENTS of 10
CAP,MONO,0.047UF,100V,10%,X7R -10
AP,MONO,0.022UF,100V,10%, X7R -10 (10)
AP,MONO,0.1UF,100V,10%,X7R INCREMENTS of 10
MOTOR,DC,6-24V,4800RPM,0.11A, 12.3G-CM,0.6W,SHFT 02X9.6mm
MOTOR,DC,3-12V,4260RPM,0.3A, 18G-CM,0.8W,SHFT 02X11mm
PLUG,DC,PWR,MALE,3.5x14.5MM 4.0x13MM STRAIN RELIEF,BLACK 规格液晶模块
TRANS,WALL,48VDC/250mA,F2 2.5mm X 5.5mm,STRAIGHT UL/CUL 规格液晶模块
PLUG,DC,PWR,FEM,2.5x5.5x10MM 4.2x12MM STRAIN RELIEF,BLACK 规格液晶模块
BUZZER,PIEZO,3500Hz,90dB, 3-28VDC,15mA,WIRES,BLACK 规格液晶模块
PLUG,DC,PWR,MALE,2.5x11MM(P201 4.3x13MM STRAIN RELIEF,BLACK 规格液晶模块
BUZZER,PIEZO,4100Hz,83dB, 3-15VDC,10mA,PCB,BLACK 规格液晶模块
BUZZER,PIEZO,3800Hz,95dB, 3-24VDC,15mA,PCB,BLACK 规格液晶模块
PROTO BOARD,2-7/16X4-1/8, PLATED THRU,PAD/HOLE,640 HOLES 规格液晶模块
PROTO BOARD,2.5X4.5,640 HOLES, PLATED THRU,PAD/HOLE,CONN.PAD 规格液晶模块
SPECIFICATIONS FOR LCD MODULE 规格液晶模块
BUZZER,PIEZO,3850Hz,75-86dB 5-16VDC,3-14mA,PCB,BLUE 规格液晶模块
MOTOR,VIBRATOR,1.3VDC@60mA 8440rpm@1.3V,.75"LEADS 规格液晶模块
TRANS,WALL,9VDC/500mA,F2 2.1mm X 5.5mm,UL/CSA,BEIGE 规格液晶模块
PROTOTYPE BUILDER,4.3"X6.8" PCB,PRE-ETCHED,DRILLED 规格液晶模块
BUZZER,PIEZO,3500Hz,95dB,BLK 3-28VDC,10mA,WIRES,FAST PULSE 规格液晶模块
CAP,ELEC,MTR STRT,21UF,125V, QUICK CONNECT 规格液晶模块
SWITCH,BCD,END PLATES,2 IN PK, USED ON 26788 & 26789
PROTOTYPE BUILDER,5.5"X8.0" PCB,PRE-ETCHED,DRILLED
BAT HOLDER,FOR BR2325
|
Jewel Hill Electronic Co., Ltd.
Maxim Integrated Products, Inc.
|
