| PART |
Description |
Maker |
| SD-44067-001 44067-1803 0440671803 |
3.00mm (.118) Pitch Micro-Fit 3.0 Wire-to-Board Header
3.00mm (.118) Pitch Micro-Fit 3.0?/a> Wire-to-Board Header
3.00mm (.118") Pitch Micro-Fit 3.0垄芒 Wire-to-Board Header
|
Molex Electronics Ltd.
|
| 0436501003 |
3.00mm (.118") Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Single Row, Right Angle, with Press-fit
|
Molex Electronics Ltd.
|
| 43650-0718 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Single Row, Vertical, with Press-fit
|
Molex Electronics Ltd.
|
| 44769-0401 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic
|
Molex Electronics Ltd.
|
| 0447641201 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Right Angle, with Press-fit Plastic
|
Molex Electronics Ltd.
|
| 44769-0803 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic
|
Molex Electronics Ltd.
|
| 44769-0403 SD-44769-001 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic Pegs
|
Molex Electronics Ltd.
|
| 44764-2401 0447642401 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Right Angle, with Press-fit Plastic Pegs
|
Molex Electronics Ltd.
|
| SD-44769-001 44769-0802 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic Pegs, 0.38um
|
Molex Electronics Ltd.
|
| 0436501205 |
3.00mm (.118") Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Single Row, Right Angle, with Press-fit Metal Retention
|
Molex Electronics Ltd.
|
| 0430451007 |
3.00mm (.118) Pitch Micro-Fit 3.0?/a> Header, Surface Mount, Dual Row, Right Angle, with Press-fit Metal Retention Clip, 10 Circuits,
|
Molex Electronics Ltd.
|
|
