| PART |
Description |
Maker |
| DR1P5-05D05 DR1P5-05D12 DR1P5-05D15 DR1P5-05S05 DR |
All specifications are typical at nominal input, full load and 25C otherwise noted
|
RSG Electronic Components GmbH
|
| BGA318 Q62702-G0043 |
From old datasheet system
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 16 dB typical gain at 1.0 GHz 12 dBm typical P-1dB at 1.0 GHz) 硅双极单片放大器（级0瓦，增益模块十六分贝典型增益.0 GHz2 dBm典型的P - 1dB的在1.0千兆赫）
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 16 dB typical gain at 1.0 GHz 12 dBm typical P-1dB at 1.0 GHz) 0 MHz - 1200 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER
|
SIEMENS[Siemens Semiconductor Group]
SIEMENS AG
|
| MCP60104 MCP604T MCP601 MCP601-E_CH MCP601-E_OT MC |
MCP601 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP602 dual operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 ...
MCP603 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP604 quad operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230. ...
2.7V to 5.5V Single-Supply CMOS Op Amps
|
MICROCHIP[Microchip Technology]
|
| MCP6041 MCP6043 MCP6044 MCP6042 MCP6044T MCP6041T |
The MCP6041 operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 nA ...
The MCP6044 quad operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 ...
The MCP6043 operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 nA ...
The MCP6042 dual operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 ...
600 nA, Rail-to-Rail Input/Output Op Amps
|
MICROCHIP[Microchip Technology]
|
| MCP603T-E/ST MCP603T-I/ST MCP6022-I/SN MCP6022-I/S |
MCP603 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP602 dual operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 ...
MCP601 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP604 quad operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230. ...
|
Microchip
|
| SM08332350 |
Electrical Specifications: Mechanical Specifications:
|
AMETHERM Circuit Protection Thermistors
|
| SM08502350 |
Electrical Specifications: Mechanical Specifications:
|
AMETHERM Circuit Protection Thermistors
|
| SM08473410 |
Electrical Specifications: Mechanical Specifications:
|
AMETHERM Circuit Protection Thermistors
|
| SM08103395 |
Electrical Specifications: Mechanical Specifications:
|
AMETHERM Circuit Protection Thermistors
|
| SM08103410 |
Electrical Specifications: Mechanical Specifications:
|
AMETHERM Circuit Protection Thermistors
|
| SM06472350 |
Electrical Specifications: Mechanical Specifications:
|
AMETHERM Circuit Protection Thermistors
|
| SM06154450 |
Electrical Specifications: Mechanical Specifications:
|
AMETHERM Circuit Protection Thermistors
|
