| PART |
Description |
Maker |
| CTA88-000-DIL CTA88-000-SO CTA88-000-SS CTA88H-000 |
8 bit Address - 8 bit Data encoder/decoder
|
Radiometrix Ltd
|
| WC32P020-XQ2M WC32P020-XP2M WC32P020-XXM |
16 32-Bit General-Purpose Data and Address Registers
|
WEDC[White Electronic Designs Corporation]
|
| WC32P040-XXM |
32-Bit Nonmultiplexed External Address and Data Buses
|
White Electronic Designs Corporation
|
| WC32P040-XXM WC32P040-XP4M WC32P040-XQ4M |
32-Bit, Nonmultiplexed External Address and Data Buses with Synchronous Interface
|
WEDC[White Electronic Designs Corporation]
|
| PXAS30KFA PXAS31KFBE PXAS37KFBE PXAS31KFA PXAS37KB |
XA 16-bit microcontroller 32 K/1 K OTP/ROM/ROMless/ 8-channel 8-bit A/D/ low voltage 2.7 V.5.5 V/ I2C/ 2 UARTs/ 16 MB address range
XA 16-bit microcontroller 32K/1K OTP/ROM/ROMless/ 8-channel 8-bit A/D/ low voltage 2.7 V.5.5 V/ I2C/ 2 UARTs/ 16MB address range
VRSTR 18VDC 14VAC 22PF SMD-0603 TR-7 NI/SN100
|
Philips Semiconductors
NXP
|
| IDT74ALVCH162830 |
3.3V CMOS 1-BIT TO 2-BIT ADDRESS DRIVER WITH 3-STATE OUTPUTS AND BUS-HOLD
|
IDT
|
| HSTL16919 |
9-bit to 18-bit HSTL to LVTTL memory address latch with 12 kohm pull-up resistor
|
Philips
|
| PI74AVC16345K PI74AVC16345A PI74AVC16345 |
2.5V, Registered 1-Bit to 4-Bit Address Driver w/3-State Outputs
|
Pericom Semiconductor C...
Pericom Semiconductor Corp.
|
| 74ALVCHS162830 74ALVCHS162830DGB |
18-bit to 36-bit address driver with bus hold (3-State)
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| HD74ALVCH162830 |
1-bit to 2-bit Address Driver with 3-state Outputs
|
Renesas Electronics Corporation
|
| SN74SSQE32882 SN74SSQE32882ZALR SN74SSQE32882-17 S |
<font color=red>[Old version datasheet]</font> 28-BIT TO 56-BIT REGISTERED BUFFER WITH ADDRESS PARITY TEST ONE PAIR TO FOUR PAIR DIFFERENTIAL CLOCK PLL DRIVER
|
TI store
|
| HI-8787 HI-8787PQI HI-8787PQT HI-8788 HI-8788PQI H |
16 Bit Parallel data converted to 429 and 561 serial data out
ARINC INTERFACE DEVICE 16-BIT PARALLEL DATA CONVERTED 429&561 SERIAL DATA OUT
512 MACROCELL 3.3 VOLT ZERO POWER ISP CP - NOT RECOMMENDED for NEW DESIGN
|
HOLTIC[Holt Integrated Circuits]
|
