| PART |
Description |
Maker |
| ST10F272Z2 ST10F272Z208 |
16-bit MCU with 256 Kbyte Flash memory and 20 Kbyte RAM
|
STMicroelectronics
|
| ST10F272 ST10F272Z2Q3 ST10F272Z2T3 |
16-bit MCU with 256 Kbyte Flash memory and 20 Kbyte RAM
|
STMicroelectronics
|
| ST10F272M12 |
16-bit MCU with 256 Kbyte Flash memory and 20 Kbyte RAM
|
STMicroelectronics
|
| BUT11/B BUT11A/B |
3.3V range 8-bit MCU for automotive with 16/32 Kbyte Flash or 16 Kbyte ROM, 10-bit ADC, 4 timers, SPI and SCI interfaces
8-bit MCU for automotive with 16 to 60 Kbyte Flash, ADC, CSS, 5 timers, SPI, SCI, I2C interface 双极晶体管HOCHSPANNUNG
|
NXP Semiconductors N.V.
|
| ST10F273M-4QR3 |
16-bit MCU with 512 Kbyte Flash memory and 36 Kbyte RAM
|
ST Microelectronics
|
| ST10F271Z1 |
16-bit MCU with 128 Kbyte Flash memory and 12 Kbyte RAM
|
STMicroelectronics
|
| ST10F276_06 ST10F276 ST10F276Z5Q3 ST10F276Z5T3 |
16-bit MCU with MAC unit, 832 Kbyte Flash memory and 68 Kbyte RAM
|
STMICROELECTRONICS[STMicroelectronics]
|
| UAA2067GB-S |
8-bit MCU for automotive, 3.8 to 5.5V operating range with 8 to 32 Kbyte Flash/ROM, 10-bit ADC, 4 timers, SPI, SCI 收发器电路电
|
NXP Semiconductors N.V.
|
| STM32F103RET6 STM32F103ZET6 STM32F103ZEH7 STM32F10 |
256 to 512 Kbytes of Flash memory
High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces
|
STMicroelectronics
|
| DSPIC33FJ32MC102 DSPIC33FJ32MC101 DSPIC33FJ32MC104 |
16-Bit Digital Signal Controllers up to 32-Kbyte Flash and 2-Kbyte SRAM
|
Microchip Technology
|
| ATMEGA64 ATMEGA64L |
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 Mhz.
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 8 MIPS throughput at 8 Mhz. 3 Volt Operation.
|
Atmel
|
