| PART |
Description |
Maker |
| PS21205 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Corporation
|
| PS21961-AT PS21961-CT PS21961-T PS21961-TW |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| MN103SD3P |
Transfer mode: Word transfer. Burst transfer. Intermittent transfer
|
Panasonic Semiconductor
|
| MN103SD0Q MN103SFD0R |
Transfer mode: Word transfer. Burst transfer. Intermittent transfer
|
Panasonic Semiconductor
|
| RPI-124 |
Sensors > Photointerrupters > Linear Phototransistor output
PHOTO INTERRUPTER, DOUBLE-LAYER MOLD TYPE
Photo interrupter/ double-layer mold type
|
Rohm
|
| NNCD5.1F NNCD5.6F NNCD6.2F NNCD6.8F NNCD4.3F NNCD4 |
ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES DOUBLE TYPE, ANODE COMMON 3PIN MINI MOLD 静电放电二极管双噪音裁剪式，阳极通用3针迷你模
RES 309-OHM 0.5% 0.10W 25PPM THIN-FILM SMD-0805 TR-7-PA ROHS
ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES DOUBLE TYPE / ANODE COMMON 3PIN MINI MOLD
ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES DOUBLE TYPE ANODE COMMON 3PIN MINI MOLD
|
NEC, Corp.
NEC Corp.
NEC[NEC]
|
| SI-3241 SI-3241N SI-3121N SI-3001N SI-3051N SI-309 |
3-Terminal/ Full-Mold/ Low Dropout Voltage Dropper Type
3-Terminal, Full-Mold, Low Dropout Voltage Dropper Type 12 V FIXED POSITIVE LDO REGULATOR, 1 V DROPOUT, PSFM3
|
SANKEN[Sanken electric]
Sanken Electric Co.,Ltd.
Sanken Electric Co., Ltd.
|
| BCR16A BCR16B BCR16E BCR16C |
MEDIUM POWER USE A, B, C : NON-INSULATED TYPE, E : INSULATED TYPE, GLASS PASSIVATION TYPE
MEDIUM POWER USE A B C : NON-INSULATED TYPE E : INSULATED TYPE GLASS PASSIVATION TYPE
|
Infineon Technologies AG
MITSUBISHI[Mitsubishi Electric Semiconductor]
|
| BCR20A BCR20E BCR20C |
MEDIUM POWER USE A/ B/ C : NON-INSULATED TYPE/ E : INSULATED TYPE/ GLASS PASSIVATION TYPE
MEDIUM POWER USE A, B, C : NON-INSULATED TYPE, E : INSULATED TYPE, GLASS PASSIVATION TYPE
|
Mitsubishi Electric Semiconductor
Mitsubishi Electric Corporation
|
