| PART |
Description |
Maker |
| MP7651AN MP7651AS MP7651 |
8-Channel, Voltage Output 10 MHz Input Bandwidth 8-Bit Multiplying DACs with Serial Digital Data Port and Chip Select Decoder
|
EXAR[Exar Corporation]
|
| MC74HC158AD MC74HC158ADT MC74HC158AN MC74HC158A ON |
Quad 2-Input Data Selector/Multiplexer
QUAD 2-INPUT DATA SELECTORS/MULTLPTEXERS
From old datasheet system
|
Motorola, Inc
ON Semi
|
| 74HC257 MC74HC257 MC74HC257D MC74HC257N ON1400 HC2 |
From old datasheet system
DUAL 2-INPUT DATA SELECTOR/MULTLPLEXER WLTH 3-STATE OUTPUTS
Quad 2-Input Data Selector/Multiplexer with 3-State Outputs
|
Motorola Inc
ON Semi
Motorola, Inc
|
| MC74HCT157A MC74HCT157AD ON1511 MC74HCT157AN |
From old datasheet system
Quad 2-Input Data Selector/Multiplexer with LSTTL-Compatible Inputs
QUAD 2-INPUT DATA SELECTOR/MULTLPLEXER WLTH LSTTL-COMPATIDLE INPUTS
|
MOTOROLA[Motorola, Inc]
ON Semi
|
| LA7205M |
AGC Amp / Input Select / AGC Det / Comparator
|
ETC
|
| 74279PC 74155PC 7439PC 7432PC 7473PC 7438PC 7432DC |
S-R-Type Latch
Anything-to-LVPECL/LVDS Translators with Pin-Selectable Divide-by-Four
LVTTL/TTL/CMOS-to-Differential LVECL/ECL Translators
DirectDrive Video Amplifier with Reconstruction Filter and Analog Switch
Quad 2-input NAND Gate
Quad 2-input OR Gate
Decoder/Driver
Dual 4-input NOR Gate
Ultra-Low-Power, Low-Cost Comparators with 2% Reference
Hex Buffer
1:2 Differential PECL/ECL/LVPECL/LVECL Clock and Data Driver
J-K-Type Flip-Flop
2.5V Video Amplifier with Reconstruction Filter
1:2 Differential LVPECL/LVECL/HSTL Clock and Data Drivers
Differential LVPECL/LVECL/HSTL Receiver/Drivers
16-Input Digital Multiplexer 16输入数字复接
1:5 Differential LVPECL/LVECL/HSTL Clock and Data Driver 16输入数字复接
1:10 Differential LVPECL/LVECL/HSTL Clock and Data Drivers 十六进制逆变
2-To-4-Line Demultiplexer 2线复用器
|
Rochester Electronics, LLC
TE Connectivity, Ltd.
|
| SLG59H1010V |
A 13.3 mΩ, 5 A, Integrated Power Switch with 12V/24V Input Lockout Select and MOSFET Current Monitor Output
|
Dialog Semiconductor
|
| FME28-461/883 FME270-461Z/883 FME28-461V/883 FME28 |
EMI INPUT FILTERS 28 & 270 VOLT INPUT
EMI INPUT FILTERS 28 & 270 VOLT INPUT 1 FUNCTIONS, 50 V, 15 A, DATA LINE FILTER
EMI INPUT FILTERS 28 & 270 VOLT INPUT 1 FUNCTIONS, 400 V, 1.5 A, DATA LINE FILTER
|
Standard Power
Crane Electronics, Inc.
|
| NB7HQ14MMNHTBG NB7HQ14MMNG NB7HQ14MMNTXG NB7HQ14M |
2.5V 7GHz / 10Gbps Differential Input to 1.8V / 2.5V 1:4 CML Clock / Data Fanout Buffer w/ Selectable Input Equalizer
2.5V 7GHz / 10Gbps Differential Input to 1.8V / 2.5V 1:4 CML Clock / Data Fanout Buffer
|
ON Semiconductor
|
| NBSG16MMNR2 NBSG16MMN NBSG16M |
2.5V/3.3V SiGe Differential CML Receiver/Driver
2.5V/3.3V Multilevel Input to CML Clock/Data Receiver/Driver/Translator Buffer
2.5V/3.3VMultilevel Input to CML Clock/Data Receiver/Driver/Translator Buffer
2.5V/3.3VMultilevel Input to CML Clock/Data Receiver/Driver/Translator Buffer
|
ONSEMI[ON Semiconductor]
|
| IN74ACT151N IN74ACT151 IN74ACT151D |
8-INPUT DATA SELECTOR/MULTIPLEXER
|
INTEGRAL[Integral Corp.]
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
